SIMATIC Safe Kinematics là một tiện ích tùy chọn cho TIA Portal, nó cho phép giám sát an toàn chuyển động trong không gian đa chiều bằng chuyển động học được xác định trước với tối đa 12 trục nội suy.

MESIDAS.COM chuyên cung cấp license (key/code) cấp phép/ kích hoạt bản quyền cho các phần mềm tự động hóa Siemens. Nếu bạn đang cần tư vấn, báo giá hay mua license tiện ích phần mềm SIMATIC Safe Kinematics thì hãy liên hệ với MESIDAS GROUP để được hỗ trợ một cách nhanh chóng, hiệu quả và tận tâm nhé.

SIMATIC Safe Kinematics có sẵn mã sản phẩm

6ES7823-0FE00-1AA0

SIMATIC Safe Kinematics V1.0 Single Runtime License download contains license certificate and installation setup for SIMATIC Safe Kinematics Block library for secure monitoring of the movement of pre-defined kinematics with up to 4 interpolating axes executable on CPU 1517TF-3 PN/DP with TIA Portal V15.1 and STEP 7 Safety Advanced V15.1. Email address required for delivery

6ES7823-0FE01-1AA0

SIMATIC Safe Kinematics V2.0 Single Runtime License download contains license certificate and installation setup for SIMATIC Safe Kinematics Block library for secure monitoring of the movement of pre-defined kinematics with up to 12 interpolating axes. Executable on CPU 1517TF-3 PN/DP, CPU 1515SP PC2 TF with CPU 1505SP TF, CPU 1517F-3 PN/DP and CPU 1518F-4 PN/DP with TIA Portal V16 from Update 1 and STEP 7 Safety Advanced V16. Email address required for delivery

Siemens giới thiệu về SIMATIC Safe Kinematics

Tổng quan về Safe Kinematics

SIMATIC Safe Kinematics V2.0 enables safe monitoring of the movement in multidimensional space by pre-defined kinematics with up to 12 interpolating axes. The following monitoring functions are available:

Safe Speed Monitor:
Safe speed monitoring can be used to monitor the Cartesian speed of individual points in the kinematics, e.g. at the tool center point or at joints.
Safe Zone Monitor:
Safe zone monitoring is used to monitor the position of the kinematics in the Cartesian space, e.g. to limit the traversing range of the kinematics or to monitor areas that can be entered by operating personnel.
Safe Orientation Monitor:
Safe orientation monitoring enables monitoring of the orientation of the flange on user-defined serial kinematics, e.g. a workpiece may only be machined if the tool is perpendicular to the floor.

The following kinematics are supported:

Cartesian portal
Roller picker (vertical and horizontal)
Delta pickers
SCARA
Articulated arm
User-defined serial kinematics

SIMATIC Safe Kinematics V2.0 is an option package of the TIA Portal and is retro-installed as setup in the TIA Portal V16 as of Update 1.
The product contains a fail-safe block library that can be integrated in the STEP 7 Safety Advanced programming environment and can be connected on the input and output side.

SIMATIC Safe Kinematics V2.0 runs on the following PLCs:

CPU 1517F‑3 PN/DP with firmware version 2.8.x
CPU 1518F‑4 PN/DP with firmware version 2.8.x
CPU 1517TF‑3 PN/DP with firmware version 2.8.x
CPU 1515SP PC2 TF with CPU 1505SP TF with firmware version 20.8.x

Yêu cầu hệ thống sử dụng Safe Kinematics

SIMATIC STEP 7 Professional (TIA Portal) V16 as of Update 1
STEP 7 Safety Advanced V16

SIMATIC Safe Kinematics requires as a subordinate drive system SINAMICS S120 with CU320-2 as of firmware V5.1 with Safety Integrated Advanced Functions.

License cho Safe Kinematics

The software is supplied with a Single Runtime License. A license is required for each F-CPU on which SIMATIC Safe Kinematics runs.
The software can only be ordered via Online Software Delivery (OSD). The download contains one license certificate and the TIA Portal installation setup for SIMATIC Safe Kinematics.
The following additional licenses are required to use SIMATIC Safe Kinematics:
- SIMATIC STEP 7 Professional (TIA Portal) V16
- STEP 7 Safety Advanced V16
- SINAMICS Safety Integrated Advanced Functions (for each monitored axis of the kinematics)