6ES7322-1BH10-0AA0 là mô đun mở rộng đầu ra số cho PLC S7-300 do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-300. 6ES7322-1BH10-0AA0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7322-1BH10-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Mục lục
Bảng tóm tắt thông số kỹ thuật 6ES7322-1BH10-0AA0
SIMATIC S7-300, Digital output SM 322 High Speed, isolated, 16 DO, 24 V DC, 0.5A, 1x 20-pole
Mã sản phẩm | 6ES7322-1BH10-0AA0 |
Dòng sản phẩm | SIMATIC S7-300, SM 322 |
Hãng sản xuất | SIEMENS |
Số lượng đầu ra số | High Speed, 16 DO 24V DC, 0.5A |
Nguồn cung cấp | 24 V DC (20.4-28.8 V DC) |
Kích thước (RxCxS) | 40x125x120 mm |
Trọng lượng | 200 g |
Bảng chi tiết thông số kỹ thuật 6ES7322-1BH10-0AA0
Article number | 6ES7322-1BH10-0AA0 |
SM322 High Speed, 16DO 24V DC, 0.5A | |
Load voltage L+ | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 20.4 V |
permissible range, upper limit (DC) | 28.8 V |
Input current | |
from load voltage L+ (without load), max. | 110 mA |
from backplane bus 5 V DC, max. | 70 mA |
Power loss | |
Power loss, typ. | 5 W |
Digital outputs | |
Number of digital outputs | 16 |
Short-circuit protection | Yes; Electronic |
Response threshold, typ. | 1 A |
Limitation of inductive shutdown voltage to | L+ (-53 V) |
Controlling a digital input | Yes |
Switching capacity of the outputs | |
on lamp load, max. | 5 W |
Load resistance range | |
lower limit | 48 Ω |
upper limit | 4 kΩ |
Output voltage | |
for signal “1”, min. | L+ (-0.8 V) |
Output current | |
for signal “1” rated value | 0.5 A |
for signal “1” permissible range, min. | |
for signal “1” permissible range, max. | |
for signal “1” permissible range for 0 to 40 °C, min. | 5 mA |
for signal “1” permissible range for 0 to 40 °C, max. | 0.6 A |
for signal “1” permissible range for 40 to 60 °C, min. | 5 mA |
for signal “1” permissible range for 40 to 60 °C, max. | 0.6 A |
for signal “1” minimum load current | 5 mA |
for signal “0” residual current, max. | 0.5 mA |
Output delay with resistive load | |
“0” to “1”, max. | 100 µs |
“1” to “0”, max. | 200 µs |
Parallel switching of two outputs | |
for uprating | No |
for redundant control of a load | Yes; only outputs of the same group |
Switching frequency | |
with resistive load, max. | 1 000 Hz |
with inductive load, max. | 0.5 Hz |
with inductive load (acc. to IEC 60947-5-1, DC13), max. | 0.5 Hz |
on lamp load, max. | 10 Hz |
Total current of the outputs (per group) | |
horizontal installation | |
— up to 40 °C, max. | 4 A |
— up to 60 °C, max. | 3 A |
vertical installation | |
— up to 40 °C, max. | 2 A |
Cable length | |
shielded, max. | 1 000 m |
unshielded, max. | 600 m |
Interrupts/diagnostics/status information | |
Alarms | No |
Diagnostics function | No |
Alarms | |
Diagnostic alarm | No |
Diagnoses | |
Diagnostic information readable | |
Wire-break | No |
Short-circuit | No |
Fuse blown | No |
missing load voltage | No |
Diagnostics indication LED | |
Rated load voltage PWR (green) | No |
Fuse OK FSG (green) | No |
Group error SF (red) | |
Status indicator digital output (green) | Yes; per channel |
Channel fault indicator F (red) | |
Potential separation | |
Potential separation digital outputs | |
between the channels | Yes |
between the channels, in groups of | 8 |
between the channels and backplane bus | Yes; Optocoupler |
Isolation | |
Isolation tested with | 500 V DC |
Connection method | |
required front connector | 20-pin |
Dimensions | |
Width | 40 mm |
Height | 125 mm |
Depth | 120 mm |
Weights | |
Weight, approx. | 200 g |
Phân phối và báo giá 6ES7322-1BH10-0AA0
Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7322-1BH10-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.