6ES7132-6FD00-0CU0 DQ 4×24…230 VAC/2A HF SIMATIC ET 200SP
Liên hệ
SIMATIC ET 200SP, digital output module DQ 4x 24..230V AC/2A HF packaging unit: 1 piece, two alternative modes: DQ and power control, fits to BU-Type U0, color code CC20, channel diagnosis.
Tải về datasheet (pdf): Tại đây!
6ES7132-6FD00-0CU0 là module mở rộng đầu ra số (digital output module) cho CPU ET200SP được hãng SIEMENS sản xuất & phát triển với thương hiệu SIMATIC thuộc dòng ET 200. 6ES7132-6FD00-0CU0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7132-6FD00-0CU0 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Bảng tóm tắt thông số kỹ thuật 6ES7132-6FD00-0CU0
SIMATIC ET 200SP, digital output module DQ 4x 24..230V AC/2A HF packaging unit: 1 piece, two alternative modes: DQ and power control, fits to BU-Type U0, color code CC20, channel diagnosis
| Mã sản phẩm | 6ES7132-6FD00-0CU0 |
| Dòng sản phẩm | SIMATIC ET 200SP, DQ 4×24 … 230 V AC/2 A HF |
| Hãng sản xuất | SIEMENS |
| Số lượng đầu ra số | DQ 4x 24..230V AC/2A HF |
| Nguồn cung cấp | 24 V DC (19.2 – 28.8 V DC) |
| Kích thước (RxCxS) | 20 x 73 x 58 mm |
| Trọng lượng | 50 g |
Bảng chi tiết thông số kỹ thuật 6ES7132-6FD00-0CU0
| Article number | 6ES7132-6FD00-0CU0 |
| ET 200SP, DQ 4×24..230VAC/2A HF, PU 1 | |
| General information | |
| Product type designation | DQ 4×24 … 230 V AC/2 A HF |
| HW functional status | From FS03 |
| Firmware version | |
| ● FW update possible | Yes |
| usable BaseUnits | BU type U0 |
| Color code for module-specific color identification plate | |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| ● Isochronous mode | No |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V14 |
| ● STEP 7 configurable/integrated from version | STEP 7 V5.5 or higher |
| ● PCS 7 configurable/integrated from version | |
| ● PROFIBUS from GSD version/GSD revision | GSD as of Revision 5 |
| ● PROFINET from GSD version/GSD revision | GSDML V2.3 |
| Operating mode | |
| ● DQ | Yes |
| ● DQ with energy-saving function | Yes |
| ● PWM | No |
| ● Oversampling | No |
| ● MSO | No |
| ● Phase control | Yes |
| ● Trailing-edge phase | No |
| ● Half-wave | Yes |
| ● Full-wave | Yes |
| Redundancy | |
| ● Redundancy capability | |
| Supply voltage | |
| Rated value (DC) | |
| permissible range, lower limit (DC) | |
| permissible range, upper limit (DC) | |
| Rated value (AC) | 230 V; 47 … 63 Hz, max. rate of change of frequency 1 mHz/s |
| permissible range, lower limit (AC) | 20.4 V |
| permissible range, upper limit (AC) | 264 V |
| Reverse polarity protection | |
| Input current | |
| Current consumption (rated value) | 8 mA; without load |
| Current consumption, max. | |
| Output voltage | |
| Rated value (AC) | 230 V; 24V AC to 230V AC |
| Power loss | |
| Power loss, typ. | 9 W; Active power, load voltage 230 V, all outputs loaded with 2 A, 50 Hz |
| Address area | |
| Address space per module | |
| ● Inputs | + 1 byte for QI information |
| ● Outputs | 8 byte |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Mechanical coding element | Yes |
| ● Type of mechanical coding element | |
| Selection of BaseUnit for connection variants | |
| ● 1-wire connection | BU type U0 |
| ● 2-wire connection | BU type U0 |
| ● 3-wire connection | BU type U0 + Potential distributor module |
| Digital outputs | |
| Type of digital output | |
| Number of digital outputs | 4 |
| Current-sinking | No |
| Current-sourcing | Yes |
| Digital outputs, parameterizable | Yes |
| Short-circuit protection | No; external fusing necessary |
| Open-circuit detection | Yes; channel by channel |
| ● Response threshold, typ. | 1 mA; 40 V AC or more |
| Overload protection | No; A miniature fuse with 10 tripping current and tripping characteristic “quick response” must be provided in the module supply |
| Controlling a digital input | Yes |
| Switching capacity of the outputs | |
| ● with resistive load, max. | 2 A; Max. 4 A, see additional description in manual |
| ● with inductive load, max. | 2 A |
| ● on lamp load, max. | 100 W; Tungsten rating in accordance with UL; for thermistors with higher power ratings, see the notes in the manual |
| Output voltage | |
| ● for signal “1”, min. | 20.4 V |
| Output current | |
| ● for signal “1” rated value | 2 A |
| ● for signal “1” permissible range, min. | 10 mA |
| ● for signal “1” permissible range, max. | 4 A; note derating data in the manual |
| ● for signal “0” residual current, max. | 3 mA |
| Output delay with resistive load | |
| ● “0” to “1”, max. | 40 ms; 2 AC cycles |
| ● “1” to “0”, max. | 20 ms; 1 AC cycle |
| Parallel switching of two outputs | |
| ● for logic links | No |
| ● for uprating | No |
| ● for redundant control of a load | Yes |
| Switching frequency | |
| ● with resistive load, max. | 10 Hz; Applies to DQ mode; limited by line frequency in PC mode |
| ● with inductive load, max. | |
| ● with inductive load (acc. to IEC 60947-5-1, AC15), max. | 10 Hz; Applies to DQ mode; limited by line frequency in PC mode |
| ● on lamp load, max. | 1 Hz; Applies to DQ mode; limited by line frequency in PC mode |
| Total current of the outputs | |
| ● Current per channel, max. | 2 A; Max. 4 A, see additional description in manual |
| ● Current per module, max. | 8 A |
| Total current of the outputs (per module) | |
| horizontal installation | |
| — up to 40 °C, max. | 8 A |
| — up to 50 °C, max. | 6 A |
| — up to 60 °C, max. | 4 A |
| vertical installation | |
| — up to 30 °C, max. | 8 A |
| — up to 40 °C, max. | 6 A |
| — up to 50 °C, max. | 4 A |
| Relay outputs | |
| ● Number of relay outputs | |
| ● Rated supply voltage of relay coil L+ (DC) | |
| ● Current consumption of relays (coil current of all relays), max. | |
| ● external protection for relay outputs | |
| ● Number of operating cycles, max. | |
| Switching capacity of contacts | |
| — with inductive load, max. | |
| — with resistive load, max. | |
| — Thermal continuous current, max. | |
| — Switching current, min. | |
| — Rated switching voltage (DC) | |
| — Rated switching voltage (AC) | |
| Cable length | |
| ● shielded, max. | 1 000 m |
| ● unshielded, max. | 600 m |
| Interrupts/diagnostics/status information | |
| Diagnostics function | Yes |
| Substitute values connectable | Yes |
| Alarms | |
| ● Diagnostic alarm | Yes |
| Diagnoses | |
| ● Diagnostic information readable | Yes |
| ● Monitoring the supply voltage | Yes |
| ● Wire-break | Yes; channel by channel |
| ● Short-circuit | No |
| ● Group error | Yes |
| Diagnostics indication LED | |
| ● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| ● Channel status display | Yes; green LED |
| ● for channel diagnostics | Yes; red Fn LED |
| ● for module diagnostics | Yes; green/red DIAG LED |
| Potential separation | |
| Potential separation channels | |
| ● between the channels | No |
| ● between the channels and backplane bus | Yes |
| ● between the channels and the power supply of the electronics | No |
| Permissible potential difference | |
| between channels and backplane bus/supply voltage | |
| Isolation | |
| Isolation tested with | 2 545 V DC/2 s (routine test) |
| tested with | |
| ● between channels and backplane bus/supply voltage | |
| ● between backplane bus and supply voltage | |
| Standards, approvals, certificates | |
| Suitable for safety functions | No |
| Ambient conditions | |
| Ambient temperature during operation | |
| ● horizontal installation, min. | -30 °C |
| ● horizontal installation, max. | 60 °C |
| ● vertical installation, min. | -30 °C |
| ● vertical installation, max. | 50 °C |
| Altitude during operation relating to sea level | |
| ● Installation altitude above sea level, max. | 2 000 m; On request: Installation altitudes greater than 2 000 m |
| Dimensions | |
| Width | 20 mm |
| Height | 73 mm |
| Depth | 58 mm |
| Weights | |
| Weight, approx. | 50 g |
Phân phối & báo giá 6ES7132-6FD00-0CU0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7132-6FD00-0CU0 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Nhận thông báo qua Email
Mới nhất
