Switch PoE công nghiệp 4-port (1 cổng IEEE 802.3af PoE) + 1 100FX SC Unmanaged Multi-mode CUE-411

Liên hệ

Mô tả switch PoE công nghiệp 4-port (1 cổng IEEE 802.3af PoE) + 1 100FX SC Unmanaged Multi-mode CUE-411.

Cung cấp switch công nghiệp sử dụng công nghệ mới nhất Power over Ethernet (PoE) hỗ trợ IEEE 802.3af, 802.3at và 802.3bt. Các thiết bị chuyển mạch có thể được sử dụng để cấp nguồn cho các thiết bị tuân thủ IEEE 802.3af/ at PD. Loại bỏ việc phải đi dây bổ sung mang lại cho bạn một giải pháp mạng công nghiệp vô cùng hiệu quả và tiết kiệm chi phí.

Mô tả Switch PoE công nghiệp CUE-411

Đặc trưng của switch PoE công nghiệp unmanaged

  • Tuân thủ tiêu chuẩn IEEE
  • Cung cấp nhiều cổng Gigabit TX với đầu nối RJ-45
  • Cung cấp nhiều khe cắm SFP hoặc đầu nối 100Base-FX SC Gigabit
  • Provides DIP switch to switch on/off of the alarm relay, broadcast storm protection

Nguồn cấp cho Switch PoE Unmanaged

  • Hỗ trợ điện áp đầu vào 48VDC
  • Có thể điều chỉnh điện áp đầu ra PoE (55Vdc) để ổn định thiết bị cổng PoE và đảm bảo có thể cung cấp nguồn với khoảng cách 100m cho cổng PoE.
  • Cung cấp 1/4 port IEEE802.3af PoE output, 15.4W mỗi cổng
  • Cung cấp 4/8 port IEEE802.3af/802.3at PoE+ output, 30W mỗi cổng
  • Bảo vệ cổng Ethernet và nguồn với cách ly 2.25K Vdc cho CUG-1628EAT
  • Bảo vệ cách ly 4KV cho cổng UTP và PoE dành cho CUG-1628EAT
  • Bảo vệ chống phân cực ngược và bảo vệ quá tải

Thiết bị đạt chuẩn công nghiệp

  • Chứng nhận UL60950-1, CE, FCC
  • Chứng nhận EN 61000-6-2 và EN 61000-6-4 được sử dụng trong môi trường công nghiệp nặng
  • Chứng nhận EN 50121-4 dành cho Railway Applications (Track Side)
  • Đạt chuẩn công nghiệp IP30
  • Nhiệt độ hoạt động từ -10 đến 60°C & có thể mở rộng -40 đến 75°C
  • Có thể lắp đặt trên thanh Ray chuẩn DIN-Rail hoặc tùy chọn

Datasheet CUE-411

Features

High Performance Network Switching Technology

  • Comply with IEEE 802.3,IEEE 802.3u,IEEE 802.3X, IEEE 802.3af
  • Provides 4 x 10/100 Mbps Ethernet ports with RJ-45 connector
  • Provides 1 x 100Mbps multi-mode SC type fiber port
  • Embedded 4 ports PoE Injector Function classified as PSE
  • Supplies 15.4 watts of power per port full load with PoE
  • RJ-45 Port support auto MDI/MDI-X crossover
  • Provides broadcast storm protection
  • Supports IEEE 802.3X flow control on full duplex, back pressure on half duplex

Robust Industrial Design

  • Robust Aluminum case complying to IP-30 housing standard
  • Supports operating temperature -10 to 70 oC & Extended temperature -40 to 80 oC
  • DIN-Rail, Panel mount or desktop installation
  • High level of immunity to electromagnetic interference & power supply surges typically found in industrial plant environments or external curb side enclosures

Reliable Power Design

  • Supports Redundant 48VDC power input
  • Supports 4,000 VDC Ethernet ESD Protection
  • Provides surge (EFT) protection 3,000 VDC for power line
  • Overload Current Reset-table Fuse present
  • Power Polarity Reverse Protection Present
  • Terminal block present for master and slave power

Overview

The Cobra CUE-411 is an Industrial 5-port Slim Unmanaged Power over Ethernet Switch with one multi-mode fiber port. It supports four PoE injector ports classified as power source equipment (PSE). With the optic port, CUE-411 transmits data at high speed for long distances up to 2 km with an SC connector. CUE-411 provides 15.4 watt of power per port and can be used to power IEEE802.3af compliant powered devices (PD) by Ethernet cable and eliminates the need for additional power wiring. The compact, slim line switch is equipped with a relay output for an event alarm for easy troubleshooting.

It offers 48 VDC redundant powers input design and is secured with Power Polarity Reverse protection and an Overload Current Reset-table Fuse. The IP-30 housing protection, wide operating temperature of -10 to 70 and DIN rail mounting makes CUE-411 suitable for an industrial environment. The E version extends the temperature rating to -40 to 80 . The CUE-411 is a plug-and-play solution for your Power over Ethernet applications.

Hardware Specifications

Interface

  • RJ-45 Ports: 4 10/100Base-TX auto-negotiation speed, Full/Half duplex, auto MDI/MDI-X (PoE port)
  • Fiber port: 1 100Base-FX multi-mode port (SC connector)
  • LEDs
    • Per unit: Power 1 (Green), Power 2 (Green), Fault(Red)
    • Fiber: Link/Active(Green)
    • TX: Link/Active(Green), Full duplex/Collision (Yellow)
    • PoE: Feeding Power (Green)
  • Power Input
    • VDC 48V
    • Redundant power with polarity reverse protect function and removable terminal block
  • Power Protection: Power Reverse Polarity: Present
  • Power Consumption
    • 4.6 watts without PoE
    • 58 watts full load with PoE
  • Dimensions: IP-30 standard, 30 mm (W) x 140 mm (H) x 95 mm (D)
  • Installation: DIN-Rail, Panel mount or desktop

Environmental

  • Operating Temperature
    • Regular: -10 to 70
    • Extended: -40 to 80
  • Storage Temperature: -40 to 85 oC (-40 to 185 oF)
  • Operating Humidity: 5%~90% RH (Non-condensing)

Technology Specifications

  • Standard:
    • IEEE802.3 10BASE-T
    • IEEE802.3u 100BASE-TX/100BASE-FX
    • IEEE802.3x Flow Control and Back pressure
    • IEEE802.3af Power over Ethernet
  • Network Media
    • 10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable EIA/TIA-568 100-ohm (100m)
    • 100Base-TX: 2-pair UTP/STP Cat. 5/5e cable EIA/TIA-568 100-ohm (100m)
  • Protocol Technology: CSMA/CD
  • Switching Architecture: Store and Forward

Performance

  • Data Transfer Rate: 14,880 pps for Ethernet port and 148,800 pps for Fast Ethernet port
  • MAC Address: 1K
  • Memory Buffer: 512 bytes
  • Back-plane: 1.0 Gbps
  • Transfer Packet Size: 1.19Mpps @ 64bytes

Regulatory Approvals

  • EMI: FCC Class A
  • EMS
    • EN6100-4-2
    • EN6100-4-3
    • EN-6100-4-4
    • EN6100-4-5
    • EN6100-4-6
    • EN61000-4-8
    • EN61000-4-11
  • Safety: UL, cUL, CE/EN60950
  • Shock: IEC60068-2-27
  • Vibration: IEC60068-2-6
  • Free Fall: IEC60068-2-32
  • Class 1 DIV 2: Pending *
  • DNV: Pending *
  • Environmental: WEEE, RoHS
  • MTBF: 325,000 hrs based on Mil-Hdbk-217F, GB
  • Warranty: 5 years

Power over Ethernet Specification

  • PoE Compliance: 100% IEEE 802.3af compliant
  • PoE Classification: Power Sourcing Equipment (PSE)
  • PoE Voltage: 45 to 48 VDC depending on power input
  • PoE Power: Up to 15.4 watts per channel
  • PoE Pin Assignment
    • RJ-45 port # 1~# 4 support IEEE 802.3af End-point, Alternative B mode.
    • Positive (VCC+): RJ-45 pin 1, 2.
    • Negative (VCC-): RJ-45 pin 3, 6.
    • Data (1,2,3,6 )
  • PoE Protection: Over-temperature, over-current, over/under-voltage and transient
Rate this product
Nhận thông báo qua Email
Nhận thông báo cho
guest

Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x