Switch công nghiệp 5-port + 1G SFP Full Gigabit Unmanaged HUG-518GSE

Liên hệ

Mô tả switch công nghiệp 5-port + 1G SFP Full Gigabit Unmanaged HUG-518GSE.

Cung cấp các thiết bị chuyển mạch switch công nghiệp không cần quản lý, chỉ cần cắm và hoạt động – một giải pháp tiết kiệm kinh tế cho các kết nối mạng công nghiệp và dễ dàng lắp đặt trên các thanh DIN-Rail hoặc trọng hộp phân phối mạng.

Mô tả switch công nghiệp HUG-518GSE

switch công nghiệp HUG-518GSE

High Performance Network Switching Technology

  • Tuân thủ các tiêu chuẩn của IEEE
  • Cung cấp nhiều cổng Gigabit TX với đầu nối RJ-45
  • Cung cấp nhiều khe cắm Gigabit SFP hoặc đầu nối SC
  • Hỗ trợ IEEE 802.3az Green Etherent (EEE / Energy Efficient Ethernet)
  • Cung cấp DIP để bật/ tắt rơ le báo động, broadcast storm control, Green Etherent và thiết lập tốc độ truyền của khe SFP

Nguồn cấp

  • Hỗ trợ cấp nguồn đầu vào từ 12 đến 48VDC
  • Bảo vệ phân cực ngược và bảo vệ quá tải

Chứng nhận thiết bị đạt chuẩn công nghiệp

  • Chứng nhận UL60950-1, CE, FCC
  • Chứng nhận EN 61000-6-2 và EN 61000-6-4 được sử dụng trong môi trường công nghiệp nặng
  • Chứng nhận NEMA TS-2
  • Chứng nhận EN 50121-4
  • Đạt chuẩn công nghiệp IP30
  • Nhiệt độ hoạt động từ -10 đến 70°C & có thể mở rộng -40 đến 80°C
  • Có thể lắp đặt trên thanh Ray chuẩn DIN-Rail hoặc tùy chọn

Datasheet HUG-518GSE

Overview about HUG-518GSE

The new and more powerful Husky Series HUG-518GSE is an Industrial 6-ports Slim Unmanaged Ethernet Switch with 1 x 100/1000Base SFP and with 5 x 10/100/1000Base-T(X) which supports IEEE 802.3z, full/half duplex and MDI/MDI-X auto-sensing RJ-45. The switch is designed with wide range redundant power input 12/24/48VDC with IP30 slim robust enclosure for easy installation. It supports power failure alarm message by relay.

HUG-518GSE is engineered to comply with heavy industrial grade EMS/EMI as well as certified by EN 61000-6-2 and EN 61000-6-4 certified. The switch provides a stable and reliable Ethernet transmission and is especially designed for harsh environments and special needs of industrial automation applications. HUG-518GSE supports two types of operating temperature, standard (-10 to 70°C) and extended (-40 to 80°C). All Ethernet Direct industrial switches support IEEE802.3az Green Ethernet for Energy Efficient Ethernet.

Features of HUG-518GSE

High Performance Network Switching Technology

  • Complies with IEEE standards
  • Provides 5 x 10/100/1000Base-T(X) with RJ-45 connector
  • Provides 1 x 100/1000Base SFP slot
  • Supports IEEE 802.3az Green Etherent (EEE / Energy Efficient Ethernet)
  • Provides DIP switch to switch on/off of the alarm relay, broadcast storm protection, green
  • Ethernet and setting up the transmission speed of the SFP slot

Reliable Power Design

  • Supports 12 to 48VDC redundant power input
  • Power reverse polarity protection and overload current protection

Robust Industrial Design

  • EN 61000-6-2 and EN 61000-6-4 certified to use in heavy industrial environment
  • EN 50121-4 certified for Railway Applications (Track Side)
  • Robust industrial design case complies with IP30 housing standard
  • Supports operating temperature -10 to 70°C & extended temperature -40 to 80°C

Hardware Specifications

Interface

  • Total Ports: 6 ports
  • RJ-45 Ports: 5 x 10/100/1000Base-T(X) auto-negotiation speed, Full/Half duplex, auto
    MDI/MDI-X
  • Fiber Ports: 1 x 100/1000Base SFP slot
  • LEDs: System: Power 1 (Green), Power 2 (Green), Fault (Amber)
  • RJ-45 Ports: 1000 Link/Active (Yellow), 10/100 Link/Active (Green)
  • Fiber Ports: Link/Active (Green)
  • DIP Switch:
    • DIP 1: OFF (Enable power failure alarm) / ON (Disable)
    • DIP 2: OFF (Enable broadcast storm protection) / ON (Disable broadcast storm protection)
    • DIP 3: OFF (Enable Green Ethernet) / ON (Disable Green Ethernet)
    • DIP 4: OFF (SFP speed 1000) / ON (SFP speed 100)
  • Alarm Contact: 1A@24VDC

Power Requirements

  • Power Input: 12 to 48VDC, redundant dual inputs
  • Power Consumption: 12VDC/3.9W, 24VDC/3.9W, 48VDC/5.3W
  • Power Protection: Reverse polarity protection, overload current protection

Physical

  • Dimensions: IP30 standard, 31.6mm (W) x 142.1mm (H) x 106mm (D)
  • Installation: DIN-Rail or optional wall mounting

Environmental

  • Operating Temperature: Regular: -10 to 70°C, Extended: -40 to 80°C
  • Storage Temperature: -40 to 85°C
  • Operating Humidity: 5% to 95% RH (Non-condensing)

Technical

  • Standard:
    • IEEE 802.3 10Base-T Ethernet
    • IEEE 802.3u 100Base-TX/100Base-FX
    • IEEE 802.3ab 1000Base-T
    • IEEE 802.3x Flow Control
    • IEEE 802.3z Gigabit Fiber
    • IEEE 802.3az EEE (Energy Efficient Ethernet)
  • Protocol Technology: CSMA/CD
  • Switching Architecture: Store and Forward

Regulatory Approvals

  • EMC: CE, EN 61000-6-2, EN 61000-6-4
  • EMI: FCC Part 15 Subpart B Class A,CE EN55022 Class A
  • EMS: EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6,
  • EN 61000-4-8
  • Railway Application (Track Side): EN 50121-4 (Certified)
  • Shock: IEC 60068-2-27
  • Vibration: IEC 60068-2-6
  • Free Fall: IEC 60068-2-32
  • Environmental: WEEE, RoHS
  • MTBF: 1,101,374 hours based on Mil-Hdbk-217F, GB
  • Warranty: 5 years
Rate this product
Nhận thông báo qua Email
Nhận thông báo cho
guest

Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x