Switch PoE công nghiệp 8-port EN 50155 Unmanaged WUE-800EAT

Liên hệ

Mô tả switch PoE công nghiệp 8-port EN 50155 Unmanaged WUE-800EAT.

Cung cấp các thiết bị chuyển mạch công nghiệp không được quản lý, đạt chứng nhận EN 50155 được thiết kế cho các ứng dụng đường sắt. Các thiết bị chuyển mạch này được đặt trong vỏ đạt chuẩn IP67 và đầu nối kín nước M12 nhằm đảm bảo sự kết nối một cách chắc chắn, đáng tin cậy, sử dụng được trong các môi trường thời tiết khắc nghiệt hoặc môi trường rung và sốc.

Mô tả Switch PoE công nghiệp WUE-800EAT

Switch PoE công nghiệp WUE-800EAT

High Performance Network Switching Technology

  • Tuân thủ các tiêu chuẩn IEEE
  • Cung cấp nhiều cổng TX với đầu nối kín nước M12 (4-pin, female, D-Coded)
  • Hỗ trợ 2 bypass UTP ports to avoid one or more nodes power fail in a ring or bus structure to collapse the network

Nguồn cấp cho switch

  • Hỗ trợ cấp nguồn từ 12 đến 48Vdc với đầu nối M23/M12 IP67
  • Bảo vệ chống phân cực ngược và bảo vệ quá tải

Thiết bị đạt chuẩn công nghiệp

  • Chứng nhận CE, FCC
  • Chứng nhận đạt chuẩn EN 50155 cho Railway Applications và IEC 61373 cho chống rung và sốc
  • Chứng nhận EN 50121-4 cho Railway Applications (Track Side)
  • Chứng nhận EN 61000-6-2 và EN 61000-6-4 được sử dụng trong môi trường công nghiệp nặng
  • Thiết bị đạt chuẩn IP67
  • Hỗ trợ phạm vi nhiệt độ hoạt động -40 to 80°C

Datasheet WUE-800EAT

Overview

The WUE-800EAT is an unmanaged switch designed to meet the requirements of EN 50155, EN 50121-4 for secured transmission in Transportation Automation such as railways, rolling stock, vehicles and moving machine applications. The WUE-800EAT is an Industrial 8×10/100Base-T(X) M12 UTP with 8 PoE/PoE+ injector ports classified as Power source equipment (PSE) and supports an extended operating temperature of -40 to 80 oC. It comes with IP67 ingress protection against dust, humidity, oil and water submersion. It uses M12 connectors to ensure water tight, robust connections and to guarantee reliable connections against environmental disturbances, such as vibration and shock. For safety, it supports 24/48VDC redundant power input and built-in power booster to regulate the PoE output voltage at 55VDC to cater for the PoE/PoE+ requirement and stabilize the connected PDs. Ethernet Direct Industrial PoE products support IEEE 802.3af/802.3at standards which are able to provide up to 180 watts PoE power to the connected PoE devices.

Features

High Performance Network Switching Technology

  • Complies with IEEE standards
  • Provides 8 x 10/100Base-T(X) with M12 connector (4-pin, female, D Coded), and each port supports PoE/PoE+ output up to 30 watts per port
  • Max. PoE power budget at 180 watts
  • Supports broadcast storm protection

Reliable Power Design

  • Equipped with redundant power inputs
  • Supports 24/48VDC power input with IP67 M23 connector (5-pin, male)
  • Power reverse polarity protection and overload current protection

Robust Industrial Design

  • EN 50155 certified for Railway Applications and IEC 61373 test passed for vibration and shock resistant
  • EN 50121-4 certified for Railway Applications (Track Side)
  • EN 61000-6-2 and EN 61000-6-4 certified to use in heavy industrial environment
  • Robust industrial design case complies with IP67 housing standard
  • Supports operating temperature -40 to 80 oC
  • Wall mount or optional DIN-Rail mounting installation

Hardware Specifications

Interface

  • Total Ports: 8 ports
  • M12 Ports: 8 x 10/100Base-T(X) M12 connector (4-pin, female, D-Coded), auto-negotiation speed, Full/Half duplex, auto MDI/MDI-X
  • PoE Ports: 8 x M12 connector (4-pin, female, D-Coded), Supports IEEE 802.3af/IEEE 802.3at End-Span, Alternative A mode
  • LEDs: System: Power 1 (Green), Power 2 (Green)
    M12 Ports: 10/100 Link/Active (Green)
    M12 Ports (PoE): Output Power On (Green), Output Power Off (Green Off)

Power Requirements

  • Power Input: 24/48VDC (20 to 57VDC), M23 (5-ping, male), redundant dual inputs
  • Power Consumption:
    24VDC: 188.9 (Full load with PoE), 3.6W (Without PoE), Booster Efficiency 95.70%
    48VDC: 191 (Full load with PoE), 4.3W (Without PoE), Booster Efficiency 96%
  • PoE Power Budget: Max. 180W for total PD consumption
    Built-in high efficiency power booster to boots up and regulate the output power at 55VDC for
    PoE/PoE+ requirement, and to stabilize the PDs with guarantee deliver of PoE power up to 100 meters
  • Power Protection: Reverse polarity protection, overload current protection

Physical

  • Dimensions: IP67 standard, 71.4mm (W) x 214.5mm (H) x 66.8mm (D)
  • Installation: Wall mount or optioal DIN-Rail mounting

Environmental

  • Operating Temperature: -40 to 80 oC
  • Storage Temperature: -40 to 85 oC
  • Operating Humidity: 5% to 95% RH (Non-condensing)

Technical

  • Standard:
    • IEEE 802.3 10Base-T Ethernet
    • IEEE 802.3u 100Base-TX/100Base-FX
    • IEEE 802.3af PoE
    • IEEE 802.3at PoE+
    • IEEE 802.3x Flow Control
  • Protocol Technology: CSMA/CD
  • Switching Architecture: Store and Forward

Regulatory Approvals

  • EMI: FCC Part 15 Subpart B Class A,CE EN55022 Class A
  • EMC: CE, EN 61000-6-2, EN 61000-6-4
  • EMS: EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4 6, EN 61000-4-8,
  • Railway Application: EN 50155 (Certified)
  • Railway Application (Track Side): EN 50121-4 (Certified)
  • Shock: IEC 61373
  • Vibration: IEC 61373
  • Free Fall: IEC 60068-2-32
  • Environmental: WEEE, RoHS
  • MTBF: 937,878 hours based on Mil-Hdbk-217F, GB
  • Warranty: 5 years
5/5 - (1 bình chọn)
Nhận thông báo qua Email
Nhận thông báo cho
guest

Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x