Switch công nghiệp 10-port IP67 EN 50155 Managed với 8 PoE ports WMG-821EPAT

Liên hệ

Mô tả switch công nghiệp 10-port IP67 EN 50155 Managed với 8 PoE ports WMG-821EPAT.

Cung cấp các thiết bị chuyển mạch Full Gigabit / Gigabit đạt chứng nhận EN 50155, được thiết kế cho các ứng dụng đường sắt. Các thiết bị chuyển mạch này được đặt trong vỏ đạt chuẩn IP67 và đầu nối kín nước M12 nhằm đảm bảo sự kết nối một cách chắc chắn, đáng tin cậy, sử dụng được trong các môi trường thời tiết khắc nghiệt hoặc môi trường rung và sốc.

Mô tả switch công nghiệp WMG-821EPAT

Switch công nghiệp WMG-821EPAT

High Performance Network Switching Technology

  • Tuân thủ các tiêu chuẩn IEEE
  • Cung cấp nhiều cổng TX với đầu nối kín nước M12 (4-pin, female, tùy chọn D-Coded, X-Coded) và đượ hỗ trợ chức năng Green Ethernet IEEE802.3az EEE (Energy Efficient Ethernet)
  • Cung cấp nhiều cổng Gigabit TX với đầu nối kín nước M12 (8-pin, female, A-Coded) hoặc nhiều khe cắm Gigabit SFP
  • Supports 2 bypass GbE UTP ports to avoid one or more nodes power fail in a ring or bus structure to collapse the network
  • Hỗ trợ các giải pháp mạng dự phòng như Direct-Ring, Direct-Chain, Join-Ring, STP, RSTP, MSTP và ITU-T G.8032
  • Công nghệ độc quyền cho tốc độ cực cao với thời gian phục hồi <10ms @250 thiết bị
  • Hỗ trợ IEEE1588 PTP V2 đồng bộ hóa thời gian chính xác, có thể hoạt động với Ordinary-Boundary, Peer to Peer Transparent Clock, End to End Transparent Clock, Master, Slave tùy theo từng cổng.
  • Hỗ trợ các giải pháp bảo mật mạng khác nhau, Port và MAC based IEEE802.1X, RADIUS, ACL, TACACS+, HTTP/HTTPS, SSL/SSH v2
  • Hỗ trợ DHCP Server/Client/Relay/Snooping/ tùy chọn Snooping 82/ tùy chọn Relay 82
  • Network traffic priority, QoS, Traffic classification QoS, CoS, bandwidth control for Ingress/Egress, broadcast storm control, DiffServ
  • Hỗ trợ IEEE802.1Q VLAN, MAC-based VLAN, IP Subnet-based VLAN, Protocol-based VLAN, VLAN translation, GVRP/MVRP
  • Hỗ trợ IGMP/MLD snooping V1/V2/V3, IGMP Filtering/Throttling, IGMP query, IGMP proxy reporting, MLD snooping
  • Hỗ trợ Dynamic IEEE 802.3ad LACP Link Aggregation, Static Link Aggregation
  • Hỗ trợ RMON, MIB II, Port mirroring, Syslog, IEEE802.1ab LLDP dành cho giám sát mạng
  • Hỗ trợ IPv6 Telnet server, ICMPv6
  • Hỗ trợ CLI, Web based management, SNMP v1/v2c/v3, Telnet server dành cho quản lý
  • Hỗ trợ nâng cấp phần mềm qua TFTP & HTTP

Nguồn cấp cho WMG-821EPAT

  • Phạm vi điện áp cung cấp rộng, điện áp thấp (12/24/48VDC) và điện áp cao (110/220VDC hoặc 110/220VAC) với đầu nối IP67 M23
  • Bảo vệ chống phân cực ngược và bảo vệ quá tải

Thiết bị đạt chuẩn công nghiệp

  • Chứng nhận UL60950-1, CE, FCC
  • Chứng nhận đạt chuẩn EN 50155 cho Railway Applications và IEC 61373 cho chống rung và sốc
  • Chứng nhận EN 50121-4 cho Railway Applications (Track Side)
  • Chứng nhận EN 61000-6-2 và EN 61000-6-4 được sử dụng trong môi trường công nghiệp nặng
  • Thiết bị đạt chuẩn IP67
  • Hỗ trợ phạm vi nhiệt độ hoạt động -40 to 80°C

Datashet WMG-821EPAT

Overview about WMG-821EPAT

The WMG-821EPAT is designed to meet the requirements of EN 50155, EN 50121-4, UL 60950-1 for secured transmission in Transportation Automation such as trackside & railway
applications, rolling stock, vehicles and moving machine applications. The WMG-821EPAT is an Industrial 8×10/100Base-T(X) M12 UTP and 2×10/100/1000Base-T(X) M12 UTP with 8 PoE injector ports classified as Power source equipment (PSE) and supports an extended operating temperature of -40 to 80 oC. It comes with IP67 ingress protection against dust, humidity, and oil and water submersion. It uses M12 connectors to ensure water tight, robust connections and to guarantee reliable connections against environmental disturbances, such as vibration and shock.

For safety, it supports 24/48VDC redundant power input and built-in power booster to regulate the PoE output voltage at 55VDC to cater for the PoE/PoE+ requirement and stabilize the connected PDs. Ethernet Direct Industrial PoE products support IEEE 802.3af/802.3at standards which are able to provide up to 180 watts PoE power to the connected PoE devices.

The WMG-821EPAT supports the most advanced Ethernet functions which include STP/RSTP/MSTP/ ITU-T G.8032 ERPS and multiple Direct-Ring for redundant cabling, IGMP, VLAN, QoS , Security, IPv6, bandwidth control, port mirroring, cable diagnostic and IEEE802.3az EEE (Energy Efficient Ethernet) management to optimize the power consumption. It provides advanced PoE Management (Auto Test & Auto Reset PD, Scheduling) and remote cable diagnostic detection to reduce maintenance costs. Ethernet Direct EN 50155 switches come with auto bypass function in the event of sudden power loss, particularly in daisy chain or linear topology networks. When power failure occurs in one of the switches on a train, the bypass relay function can activate, automatically bypassing the internal circuits and maintaining link between neighboring equipment. With this function, secured data transmission from terminals to backbone and higher network availability can be 100% guaranteed. In addition, the EN 50155 certified covers power input voltage, surge, EFT, ESD, vibration and shock.

Features of WMG-821EPAT

High Performance Network Switching Technology

  • Complies with IEEE standards
  • Provides 8 x 10/100Base-T(X) with M12 connector (4-pin, female, D-Coded) and supporting of Green Ethernet IEEE802.3az EEE (Energy Efficient Ethernet) function
  • Provides 2 x 10/100/1000Base-T(X) with M12 connector (8-pin, female, A-Coded) and
    supporting bypass function
  • Supports various network redundant solutions, including Direct-Ring, Direct-Chain,
    Join-Ring, STP, RSTP, MSTP and ITU-T G.8032
  • Proprietary ultra high speed redundant technology with < 10ms recovery time @ 250
    devices
  • Supports IEEE1588 PTP V2 for precise time synchronization, to operate in OrdinaryBoundary, Peer to Peer Transparent Clock, End to End Transparent Clock, Master, Slave mode by each port
  • Supports various network security solutions, Port and MAC based IEEE802.1X, RADIUS, ACL, TACACS+, HTTP/HTTPS, SSL/SSH v2
  • Supports DHCP Server/Client/Relay/Snooping/Snooping option 82/Relay option 82
  • Network traffic priority, QoS, Traffic classification QoS, CoS, bandwidth control for
  • Ingress/Egress, broadcast storm control, DiffServ
  • Supports IEEE802.1Q VLAN, MAC-based VLAN, IP Subnet-based VLAN, Protocol-based
  • VLAN, VLAN translation, GVRP/MVRP
  • Supports IGMP/MLD snooping V1/V2/V3, IGMP Filtering/Throttling, IGMP query, IGMP
    proxy reporting, MLD snooping
  • Supports dynamic IEEE 802.3ad LACP Link Aggregation, Static Link Aggregation
  • Supports RMON, MIB II, Port mirroring, Syslog, IEEE802.1ab LLDP for network monitoring
  • Supports IPv6 Telnet server, ICMPv6
  • Supports CLI, Web based management, SNMP v1/v2c/v3, Telnet server for management
  • Supports firmware upgrade via TFTP & HTTP with redundant firmware option

Reliable Power Design of WMG-821EPAT

  • Supports 24/48VDC redundant power input with IP67 M23 connector
  • Power reverse polarity protection and overload current protection
  • Built-in high efficiency power booster to cater for for the PoE/PoE+ requirement

Robust Industrial Design

  • EN 50155 certified for Railway Applications and IEC 61373 test passed for vibration and shock resistant
  • EN 50121-4 certified for Railway Applications (Track Side)
  • EN 61000-6-2 and EN 61000-6-4 certified to use in heavy industrial environment
  • Robust industrial design case complies with IP67 housing standard
  • Supports operating temperature -40 to 80 oC
  • Wall mount or optional DIN-Rail mounting installation

Hardware Specifications of WMG-821EPAT

Interface for WMG-821EPAT

  • Total Ports: 10 ports
  • M12 Ports: 8 x 10/100Base-T(X) M12 connector (4-pin, female, D-Coded) and 2 x
    10/100/1000Base-T(X) M12 connector (8-pin, female, A-Coded), auto-negotiation speed, Full/Half duplex, auto MDI/MDI-X
  • PoE Ports: 8 x M12 connector (4-pin, female, D-Coded), Supports IEEE 802.3af/IEEE 802.3at End-Span, Alternative A mode
  • Console Port: RS-232, M12 connector (5-pin, male, A-Coded)
  • LEDs: System: Power 1 (Green), Power 2 (Green), Fault (Amber), CPU Act (Green), Ring Master (Amber)
    M12 Ports: 10/100 Link/Active (Green), 1000 Link/Active (Amber)
    M12 Ports (PoE): Output Power On (Green), Fault (Geeen flash 1 time per second), Output Power Off (Green Off)
  • Alarm Contact: 1A@24VDC, M12 connector (5-pin, male, A-Coded)
  • CPU Watchdog: Supported

Power Requirements for WMG-821EPAT

  • Power Input: 24/48VDC (20 to 57VDC), M23 (5-ping, male), redundant dual inputs
  • Power Consumption:
    24VDC: 198.3 (Full load with PoE), 8.9W (Without PoE), Booster Efficiency 95.00%
    48VDC: 198.8 (Full load with PoE), 10.1W (Without PoE), Booster Efficiency 95.30%
  • PoE Power Budget: Max. 180W for total PD consumption
    Built-in high efficiency power booster to boots up and regulate the output power at 55VDC for
    PoE/PoE+ requirement, and to stabilize the PDs with guarantee deliver of PoE power up to 100 meters
  • Power Protection: Reverse polarity protection, overload current protection

Physical

  • Dimensions: IP67 standard, 240mm (W) x 168mm (H) x 70mm (D)
  • Installation: Wall mount or optioanl DIN-Rail mounting

Environmental for WMG-821EPAT

  • Operating Temperature: -40 to 80 oC
  • Storage Temperature: -40 to 85 oC
  • Operating Humidity: 5% to 95% RH (Non-condensing)

Technical of WMG-821EPAT

  • Standard:
    • IEEE 802.3 10Base-T Ethernet
    • IEEE 802.3u 100Base-TX/100Base-FX
    • IEEE 802.3ab 1000Base-T
    • IEEE 802.3af PoE
    • IEEE 802.3at PoE+
    • IEEE 802.3x Flow Control
    • IEEE 802.3ad Port trunk with LACP
    • IEEE 802.3ac VLAN Tagging extension (Max. frame size extended to 1522 Bytes)
    • IEEE 802.3az EEE (Energy Efficient Ethernet)
    • IEEE 802.1D Spanning Tree
    • IEEE 802.1w Rapid Spanning Tree
    • IEEE 802.s Multiple Spanning Tree
    • IEEE 802.1p Class of Service
    • IEEE 802.1Q VLAN Tagging
    • IEEE 802.1X User Authentication (Radius)
    • IEEE 802.1AB LLDP
    • ITU-T G.8032 / Y.1344 ERPS (Ethernet Ring Protection Switching)
  • Protocol Technology: CSMA/CD
  • Switching Architecture: Store and Forward

Regulatory Approvals

  • EMI: FCC Part 15 Subpart B Class A,CE EN55022 Class A
  • EMC: CE, EN 61000-6-2, EN 61000-6-4
  • EMS: EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6,
    EN 61000-4-8,
  • Safety: UL 60950-1
  • Railway Application: EN 50155 (Certified)
  • Railway Application (Track Side): EN 50121-4 (Certified)
  • Shock: IEC 61373
  • Vibration: IEC 61373
  • Free Fall: IEC 60068-2-32
  • Environmental: WEEE, RoHS
  • MTBF: 362,429 hours based on Mil-Hdbk-217F, GB
  • Warranty: 5 years

Software Specifications of WMG-821EPAT

Redundancy:

  • Direct-Ring, Direct-Chain, Join-Ring < 10ms recovery time,
    (Each switch can configure up to 5 rings regardless of Direct-Ring, Direct-Chain, Join-Ring, and each ring can contents 250 units of switches), supports loop protection
    STP/RSTP/MSTP
  • ITU-T G.8032 / Y.1344 ERPS with < 50ms recovery time
    (Single Ring, Sub-Ring, Multiple ring topology networks)
  • Link Aggregation: Static supports up to 5 trunk groups
  • Dynamic (IEEE 802.3ad LACP) supports up to 5 trunk groups

VLAN:

  • VID 1 to 4094
  • VLAN group up to 4094 groups
  • IEEE 802.1ad Q-in-Q
  • MAC-based VLAN (256 entries)
  • IP Subnet-based VLAN (128 entries)
  • Protocol-based VLAN (Ethernet, SNAP, LLC), (128 entries)
  • VLAN Translation (256 entries)
  • GVRP (GARP VLAN Registration Protocol)
  • MVR (Multicast VLAN Registration)

QoS:

  • Supports GOOSE Message, follow IEC 61850 standard to achieve zero packet loss
  • Port based and IEEE 802.1p based CoS
  • QoS determined by port, per port 8 active priorities queues
  • IP Precedence based Co, IP DSCP based CoS
  • DiffServ (RFC 2474) Remarking

Bandwidth Control:

Ingress/Egress

Storm Control:

Unicast, Broadcast, Multicast

IGMP/MLD Snooping:

  • IGMP Snooping v1/v2/v3, MLD Snooping v1/v2
  • Port Filtering Profile
  • Throttling, Fast Leave
  • Maximum Multicast Group: Up to 1022 entries
  • Query / Static Router Port

Security:

  • IEEE 802.1X (Port-based, MAC-based), RADIUS, TACACS+ 3.0
  • Supports ACL, no. of rules up to 256 entries
  • HTTP/HTTPS, SSL, SSH v2
  • Local Authentication
  • Remote Access Security: RADIUS, TACACS+
  • Management interface access filtering via Web, Telnet/SSH, CLI console

Management:

  • SNMP, Web, Telnet/SSH, CLI management
  • TFTP/HTTP backup/restore configurations
  • Firmware upgrade via TFTP/HTTP, supports dual firmware
  • RMON I (1, 2, 3, 9 group), RMON II
  • RFC1213 MIB II, Private MIB
  • Supports UPnP, IP Source Guard, Port Mirroring
  • Warning message sends to syslog, e-mail, alarm relay
  • DNS Client, Proxy
  • LLDP: LLDP-MED

System Log:

Supports local system log and remote Syslog server

DHCP:

  • Server, Client, Relay, Snooping
  • Snooping option 82, Relay option 82

Time Management:

IEEE1588 PTP V2 (Hardware Time Stamp): Ordinary-Boundary, Peer to Peer Transparent
Clock, End to End Transparent Clock, Master, Slave
NTP/SNTP Client

IPv6:

  • IPv6 Management Telnet Server/ICMP v6
  • SNMP over IPv6, HTTP over IPv6, SSH over IPv6, IPv6 Telnet, IPv6 NTP (Client), IPv6 SNTP (Client), IPv6 TFTP, IPv6 QoS, IPv6 ACL (256 entries)

Green Ethernet:

  • Supports IEEE802.3az EEE (Energy Efficient Ethernet): Management to optimize the power consumption
  • Determine the cable length and lowering the power for ports work with short cable
  • Lower the power for a port when there is no link
  • LED Power Management: Adjustment on LEDs intensity

Cable Diagnostic: (Copper ports only)

Shows physical status of the UTP cable, in order to get more accurate result the cable length
suggestion is 7-140 meters

Advance PoE Management:

  • PoE PD Failure Auto Checking and Auto reset when PD fails
  • PoE Scheduling (On/Off schedule weekly)
  • PoE Configuration, PoE Enable/Disable
  • Power limit by classification, Power limit by management
  • Max. PoE power budges at 180W limitation
  • Power feeding priority
Rate this product
Nhận thông báo qua Email
Nhận thông báo cho
guest

Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x