Bộ chuyển đổi quang điện công nghiệp Slim Ethernet to Fiber SC 10/100Base-T(X) sang 100Base-FX Multi-mode RUE-111SENM02

Liên hệ

Mô tả bộ chuyển đổi quang điện công nghiệp Slim Ethernet to Fiber SC 10/100Base-T(X) sang 100Base-FX Multi-mode RUE-111SENM02.

Cung cấp bộ chuyển đổi Fast Ethernet & Gigabit cấp công nghiệp không cần quản lý, hỗ trợ chuyển đổi giữa Ethernet điện và Ethernet quang (được gọi là bộ chuyển đổi quang điện). DIP cho phép người dùng dễ dàng thiết lập cấu hình chức năng như full/half duplex, Link Fault Pass Through, Ethernet flow control (802.3x), selecting Switch Mode (store & forward) or Converter Mode (Jumbo frame Pass-through).

Mô tả bộ chuyển đổi quang điện công nghiệp RUE-111SENM02

bộ chuyển đổi quang điện công nghiệp RUE-111SENM02
Bộ chuyển đổi quang điện công nghiệp RUE-111SENM02

Đặc trưng chung của bộ chuyển đổi

  • High Performance Network Switching Technology
  • Chuyển đổi giữa 10/100/1000Base-T(X) và 100/1000Base SFP Fible
  • Chuyển đổi giữa 10/100Base-TX và 100Base-FX
  • DIP thiết lập chức năng giữa chế độ Store-and-Forward và Pass through
  • Hỗ trợ LFP (Link Fault Pass-through) và Jumbo frames pass through.

Nguồn cấp cho bộ chuyển đổi

  • Phạm vi nguồn cấp rộng từ 12 đến 48VDC
  • Bảo vệ chống phân cực ngược và bảo vệ quá tải

Thiết bị đạt chuẩn công nghiệp

  • Chứng nhận CE, FCC
  • Đạt tiêu chuẩn EN 61000-6-2 và EN 61000-6-4 được phép sử dụng trong môi trường công nghiệp nặng
  • Chứng nhận EN 50121-4 dành cho Railway Applications (Track Side)
  • Thiết bị đạt chuẩn bảo vệ IP30 trong công nghiệp
  • Hỗ trợ phạm vi nhiệt độ hoạt động từ -10 đến 70°C & có thể mở rộng từ -40 hoặc -20 đến 80°C
  • Dễ dàng lắp đặt trên những thay ray chuẩn DIN hoặc tùy chọn

Datasheet RUE-111SENM02

Features

High Performance Network Switching Technology

  • Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3x
  • Provides 1 x 10/100Base-T(X) Ethernet port with RJ-45 connector
  • Provides 1 x 100Base-FX multi-mode fiber port with SC connector
  • Supports dip switch adjustable Link Fault Pass-through (LFP) function
  • Alarm relay design for power or port failure detection

Reliable Power Design

  • Supports 12 to 48VDC redundant power input
  • Power reverse polarity protection and overload current protection
  • Alarm relay design for power or port failure detection

Robust Industrial Design

  • EN 61000-6-2 and EN 61000-6-4 certified to use in heavy industrial environment
  • EN 50121-4 certified for Railway Applications (Track Side)
  • Robust industrial design case complies with IP30 housing standard
  • Supports operating temperature -40 to 80oC
  • DIN-Rail or optional wall mounting installation

Specifications

Interface

  • Total Ports: 2 ports
  • RJ-45 Port: 1 x 10/100Base-T(X) auto-negotiation speed, Full/Half duplex, auto MDI/MDI-X
  • Fiber Port: 1 x 100Base-FX Multi-mode with SC connector
  • LEDs: Power 1 (Green), Power 2 (Green), Fault (Red), Fiber (Green), 100 (Amber),
    LAN (Green)
  • Alarm Contact: 1A@24VDC
  • DIP Switch:
    – DIP 1: OFF (Auto: Auto Negotiation Mode) / ON (Force: Auto Negotiation Mode)
    – DIP 2: OFF (Copper: 100Mbps) / ON (Copper: 10Mbps)
    – DIP 3: OFF (Copper: Full Duplex) / ON (Copper: Half Duplex)
    – DIP 4: OFF (Disable Link Fault Pass-through) / ON (Enable Link Fault Pass-through)
    – DIP 5: OFF (Disable Flow Control) / ON (Enable Flow Control)
    – DIP 6: OFF (Switch Mode) / ON (Pass through Converter mode)
  • Link Fault Pass-through (LFP): If Copper or Fiber port link down, the converter will force another port to shutdown too.

Power Requirements

  • Power Input: 12 to 48VDC, redundant dual inputs
  • Power Consumption: 2.9 watts
  • Power Protection: Reverse polarity protection, overload current protection

Physical

  • Dimensions: IP30 standard, 38.6mm (W) x 142.1mm (H) x 106mm (D)
  • Installation: DIN-Rail or optional wall mounting

Environmental

  • Operating Temperature: -40 to 80oC
  • Storage Temperature: -40 to 85oC
  • Operating Humidity: 5% to 95% RH (Non-condensing)

Technology

  • Standard:
    – IEEE 802.3 10Base-T Ethernet
    – IEEE 802.3u 100Base-TX/100Base-FX
    – IEEE 802.3x Flow Control
  • Protocol Technology: CSMA/CD
  • Switching Architecture: Store and Forward

Regulatory Approvals

  • EMC: CE, EN 61000-6-2, EN 61000-6-4
  • EMI: FCC Part 15 Subpart B Class A,CE EN55022 Class A
  • EMS: EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6,
  • EN 61000-4-8,
  • Safety: UL 60950-1
  • Railway Application (Track Side): EN 50121-4 (Certified)
  • Shock: IEC 60068-2-27
  • Vibration: IEC 60068-2-6
  • Free Fall: IEC 60068-2-32
  • Environmental: WEEE, RoHS
  • MTBF: 1,199,572 hours based on Mil-Hdbk-217F, GB
  • Warranty: 5 years
5/5 - (1 bình chọn)
Nhận thông báo qua Email
Nhận thông báo cho
guest

Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x